A 6ft fibre optic Christmas tree is a pre-lit tree where the light runs through the branches themselves, so the whole tree glows rather than showing separate bulbs. This one comes in white and blue with LED lights built in, and it packs down to a length of 1000 mm. If you want a tree that looks modern and needs no lights to untangle, it is worth a close look.
Below: how fibre optic trees differ from the classic kind, who they suit, how to measure your space, and what to know about storing it after Christmas.
What makes a fibre optic tree different
A traditional pre-lit tree has strings of bulbs wound through green branches. A fibre optic tree carries light through thin strands that glow along their length, so the tree seems to shimmer. The effect is closer to a soft, cool glow than a row of dots.
This tree is described as white and blue, with LED lights and pre-lit from the start. In practice that means the lights are already on the tree. Unpack it, assemble the sections following the instructions, plug it in and it lights up.
Who it suits
- Anyone who loves a modern look. The white and blue palette sits well with silver, glass and clean lines.
- A small flat or a corner of a room. A slim, glowing tree can fill a corner without crowding it.
- A second tree. Plenty of households put one in the hall, the dining room or the bedroom as well as the main living room tree.
- People who dislike untangling. The lights are already part of the tree.
- A gift for someone setting up a first Christmas place of their own. It arrives as one item, with no separate lights to buy.
Check the space first
Six feet is about 1.8 metres. Most UK ceilings are around 2.4 metres, so a 6ft tree leaves room above it. Still, it is worth measuring, because a tree stand adds height and an ornament on top adds more.
Here is a short checklist to use before you order:
- Height. Measure from the floor to the ceiling and subtract the height you want to leave clear above the tree.
- Width. Check the floor space. A tree needs room for its branches, plus a gap so people can walk past.
- Power. Find the nearest socket. A pre-lit tree needs power, and a cable stretched across a walkway is a trip hazard. Place the tree close to the socket, or use a suitable cable cover.
- Heat. Keep it clear of radiators and open fires.
Storage after Christmas
This is where many people decide for or against an artificial tree. The listing describes this one as easy to store. The packed size is 1000 x 160 x 180 mm and the weight is 6000 grams, which is 6 kg. That is a long, slim bundle that can slide behind a wardrobe, under a bed or into a loft.
| Detail | Figure |
|---|---|
| Height | 6ft |
| Packed size | 1000 x 160 x 180 mm |
| Weight | 6000 g |
| Lights | Pre-lit LED, fibre optic |
| Colour | White and blue |
A tree that packs this narrow is easier to carry up the stairs and to put away on the first of January, which matters when you are tired and the decorations are everywhere.
How to dress it
A fibre optic tree already supplies the sparkle, so decorating is about restraint. A few ideas:
- Silver and white baubles. They echo the glow and keep the look calm.
- Glass ornaments. They catch the light from the fibres.
- A star or a simple topper. One focal point at the top is plenty.
- A tree skirt or a basket at the base. It hides the stand and gives presents somewhere to sit.
Place heavier ornaments near the trunk and lighter ones towards the tips of the branches, so the shape stays neat.
A tree for a season ahead
Christmas shelves fill early, and a tree is the biggest decision of the lot. Choosing in October gives you time to measure, to plan where it goes and to pick the ornaments that suit it. It also leaves December for the fun parts.
Set-up tips
- Unpack the sections and lay them out in order.
- Fit the base on a flat, steady floor.
- Add the sections from the bottom up, following the instructions that come with the tree.
- Spread the branches out and down so the tree looks full.
- Plug in and check the lights before you add the ornaments.
Switch the lights off when you leave the house or go to bed, and follow the instructions supplied with the tree for safe use.
Is it the right tree for you?
Choose this tree if you like a cool, modern glow, want the lights built in and have a spot that suits a 6ft tree. It is a good fit for a hall, a dining room or a flat. If you prefer a deep green look with warm bulbs, a traditional pre-lit tree may feel more familiar.
For most people it comes down to three questions: does it fit the space, is a socket close by, and does the white and blue look suit the room? If the answer to all three is yes, this tree makes the evening you put it up a good deal easier.
Frequently asked questions
How tall is the tree?
It is a 6ft tree, which is about 1.8 metres. Allow a little extra for the base and any topper.
Are the lights already on the tree?
Yes. The listing describes it as pre-lit with LED lights and fibre optic strands, so there is no string of lights to fit.
How big is it when packed?
The packed size is 1000 x 160 x 180 mm and it weighs 6000 grams, so it stores in a loft or behind a wardrobe.
Key details
| Packed size | 1000 x 160 x 180 mm |
|---|---|
| Weight | 6.0 kg |
Supplier-stated measurements.
6ft Pre-Lit Fibre Optic Christmas Tree - White Blue
See price & details
